 |
DGO 110 Series Connectors
Our simplest connector series, designed to accommodate 50 ohm cables. The receptacle contains integral glass-to-metal seals. Plugs can also be provided with integral glass-to-metal seals if required.
- 50 Ohm Coax
- Glass-to-metal seal pressure barrier in receptacle for maximum protection of equipment (10,000 psig open face pressure capability)
- Dual O-ring Seals: a primary face seal with secondary piston seal
- Simple, durable construction; excellent for cameras or instruments used in or around water or other harsh environments
- Available from stock
To discuss your connector application with a Teledyne D.G.O’Brien engineer, contact us.
|
|
|
Materials (standard)
Body: |
316/316L |
| Coupling rings: |
316 |
| Insulators: |
Plug: Nylon
Receptacles: Glass |
| O-rings: |
Buna-N |
Note: Alternative materials options are
available, consult factory for details
Performance
Impedance: |
50 ohms |
| Frequency Range: |
0-1.5 GHz |
| Insulation Resistance: |
5 Gohms at 500VD |
| Max Operating Voltage: |
1000VRMS |
| Max Operating Current: |
3 Amps |
Temperature Range:
| -40ºF to 165ºF |
| -65ºF to 175ºF |
|
Recommended Cables
For general use (including shallow water, non-critical applications): Mil-C-17/28 RG-58
For deep submergence/critical applications: TRC CN-4 (50 ohm)
Note: Alternate cables can be accommodated; consult factory for details. |
|
|
Site by Hexa
